Walton Electronics Co., Ltd.
Shenzhen Walton Electronics Co., Ltd.
Add to Cart
FODM217DR2 1 Channel integrated circuits transistor output optocouplers 4 PIN TRANSISTOR OUTPUT MFP SR2835ESKG
The FODM217 series consist of a gallium arsenide infrared emitting diode driving a phototransistor. The FODM214 series consist of two gallium arsenide infrared emitting diodes connected in inverse parallel for AC operation. Both were built in a compact, half−pitch, mini−flat, 4−pin package. The lead pitch is 1.27 mm
Features
• Current Transfer Ratio Ranges from 20 to 600% at IF = ±1 mA, VCE = 5 V, TA = 25°C
♦ FODM214 − 20 to 400%
♦ FODM214A − 50 to 250% at IF = 5 mA, VCE = 5 V, TA = 25°C
♦ FODM217A − 80 to 160%
♦ FODM217B − 130 to 260%
♦ FODM217C − 200 to 400%
♦ FODM217D − 300 to 600%
• Safety and Regulatory Approvals:
♦ UL1577, 3750 VACRMS for 1 min
♦ DIN EN/IEC60747−5−5, 565 V Peak Working Insulation Voltage
• Applicable to Infrared Ray Reflow, 260°C Typical Applications
• Primarily Suited for DC−DC Converters
• For Ground Loop Isolation, Signal to Noise Isolation
• Communications – Adapters, Chargers
• Consumer – Appliances, Set Top Boxes
• Industrial – Power Supplies, Motor Control, Programmable Logic Control
| Product Category: | Transistor Output Optocouplers |
| SMD/SMT | |
| SOP-4 | |
| 1 Channel | |
| 3750 Vrms | |
| NPN Phototransistor | |
| 300 % | |
| 50 mA | |
| 1.4 V | |
| 80 V | |
| 50 mA | |
| 0.4 V | |
| 3 us | |
| 3 us | |
| 6 V | |
| 150 mW | |
| - 55 C | |
| + 110 C | |
| FODM217D | |
| Reel | |
| Cut Tape | |
| MouseReel | |
| Configuration: | 1 Channel |
| Product Type: | Transistor Output Optocouplers |
| 3000 | |
| Subcategory: | Optocouplers |
| Unit Weight: | 0.002822 oz |